Posts by date

[Hon30] – Water through the creek

Posted by Gerd on Wednesday, 30 December 2015 with No Comments

Hello,

today, I’ve an update on my Hon30 layout. As I decided to make a creek on the new segment, I had to found a way to model the water. After research on the internet, I decided to use products from NOCH, which are the same as Woodland Realistic Water and Water Effects.

First I added some stones from plaster pieces to the river bed and gave everything a coat of paint to give the basic structure to the creek. BTW, most creeks in the area I live are simple as this one and no rocky and whirling rivers.

Next I applied the first layer of Realisitc Water. It’s important to follow the instructions. Each layer should be max. 3mm thick and needs to dry for 24h. During this time, it will shrunk by 50%. If you’re not sure how this material work, you might make a test piece outside the layout to learn how to work with this products. The Realistic Water is very thin stuff, so you should hold the river horizontal. With the second layer, I added some twigs and let them dry again.

In the end, I worked with 5 layers which turned out to be the right amount of water in the creek. I added some wave structure with water effects where rocks and sticks were in the water. Once the vegetation around comes to the shores of the creek, this will look really nice.

Next I’ll complete the railroad bridge and place the trees. As you can see in the last shot, the background is also ready to be installed.

Gerd

[BCRR] The layout for the 2016 live steam show

Posted by Gerd on Sunday, 20 December 2015 with No Comments

Hello logging railroaders,

this week, we spend two days at the convention center at Karlsruhe to set up our 2″-scale logging railroad for the 2016 live steam show. As every year, we did some changes to the track plan and added some new structures and details. We got a new “industrial spur” for wood dump cars and we’ll get a very special new structure. But most details are still “top-secret” to feet the curiosity of the visitors 🙂

My dad, Jonas and Ralf supported me, so we could finish work within two days. We also did some changes to the turntable and some structures. Finally, the tracks and structures are all placed.

We also made some new wood structures from material, we found in a scrap pile from the previous event…

In January, we’ll do the last detail work in the days before the show, including the trees for the forests and all the fine detail stuff/scenes, to create a nice and charming backwoods flair.

Regards, Gerd

[Hon30] – shaping the landscape

Posted by Gerd on Wednesday, 9 December 2015 with 1 Comment

Hello,

Clipboard03in my last posting, I announced, that the setup work for the big live steam event will start this week, but I was wrong in date by one week. So I had some more time to do some progress on the new module of my Hon30 layout.

I sculptured the landscape with plaster and painted earth brown. I ballast the track in the common way with Woodland ballast, mixed from different colors and some fine turf. I also use a mixture of fine turf for basic ground cover before the vegetation is set.

I also build up a Faller barn which got heavily weathered with paint before assembling. The bridge will get some timbers below the track, once the creek is finished.

Cheers, Gerd

[Hon30] Progress on the new module

Posted by Gerd on Saturday, 5 December 2015 with 1 Comment

Hello, I did some progress on the new module during the past days. I added another scenic element to the module. The railroad will cross a small creek on the left part of the module. Therefore I made a cut-out to the deck of the Casani box. I glued a piece of foam below the […]

[Hon30] The new module get started

Posted by Gerd on Wednesday, 2 December 2015 with 3 Comments

I spend the first evening working on the new module of my Hon30 layout. I made the module from two 20x30cm Casani boxes and glued/screwed them together for a 60cm long module. Next I installed the plugs and sockets, layed the tracks at the module joints and did some tests with the existing modules. I […]

[Hon30] operation session on the WBE

Posted by Gerd on Monday, 30 November 2015 with No Comments

Hello logging railroaders, in the past days, I set up two different layouts from my Hon30 modules and ran some trains with different locos. I also tested the new Minitrains Controller and I’m very happy with it. Here are a couple of photos, taken during the op-session. I guess it’s time to start the next […]

[Hon30] Another diesel loco…

Posted by Gerd on Sunday, 29 November 2015 with 1 Comment

Once started, it’s hard to stop… I got a Roco Feldbahn-Diesel of the newer batch from a friend. As common, this loco isn’t a good performer in original factory setting. The loco is to light and without any flywheel. So I removed the original motor, installed a Mashima 1020 with small flywheel and a lot […]

[Hon30] – The first diesel loco on the WBE

Posted by Gerd on Wednesday, 25 November 2015 with 2 Comments

I got a loco for my Hon30 logging railroad. Once I got rid of the DCC stuff, I don’t need new decoders anymore, therefore it’s cheaper to get new locos into service. I couldn’t resist and invested some money in one of the great little Minitrains Gmeinder locos. I choosed the maroon-red one and I […]

[Hon30] News from my Hon30 logging layout – Goodbye DCC

Posted by Gerd on Sunday, 22 November 2015 with 1 Comment

Hello again, after finishing the preparations for the live steam show in January with my 2“-scale railroad, I decided to spend some attention to my Hon30 logging railroad during the winter time. There’s still a new module on my to-do list and some other ideas. First off all, I’ll start with a fundamental decision. I […]

BCRR – Rivet details on the new diamond stack

Posted by Gerd on Tuesday, 17 November 2015 with No Comments

Hello, I added the rivet detail to the new diamond stack. I used grooved pins to add the rivets and chiseled a groove beside where the two metal sheets would join in prototype. To drill the holes on the center ring, I used the round table on the mill and spaced them 10° appart. I […]